Method of Application
XTRA-SEAL membranes are applied by using a propane torch or by mechanical fastening.
The substrate surface must be clean, dry, smooth, and free of any irregularities. According to the surface conditions, a coat of water base primers may be required, prior to the applications of the membranes. XTRA-SEAL can be applied to the substrate fully bonded, semi bonded or loose lay, and the method of adhesion to the substrate shall be decided according to the waterproofing system design. Side laps should be from 12-15 cm. For more information on application refer to the TECHNOBIT Application Guide
Close Every Gap. Restore Every Surface.
