Technobit Hot Applied Joint Sealant

Method of Application

Melt TECHNOBIT JOINT SEALANT and Sealing Compound in an indirectly thermostatically controlled bitumen melting furnace with stirring unit at temperatures of +150 °C to +180 °C.

Joint filling

• Pour hot sealing compound into joint using a suitable vessel.
• Observe joint cross section (as mentioned above). Deeper joints are to be filled in accordingly.
• Remove excess material using a suitable tool (for example a spatula or trowel).
• Sand the filler subsequently using fine quartz sand.
• Unused material may be melted again.

Surface coating:

• Two coats with a thickness of 1.5 mm, so that complete coat is 3.0 mm thick.
• In areas at risk of cracking, for example wall-floor-connection, it may be necessary to apply additional layers or add enforcing fabrics, sealing tapes or similar as a precautionary measure.