Technobit Coat WB TS5

Method of Application

The surface to be treated must be free from dirt, debris and scale and should be thoroughly saturated with water. Application of TECHNOBIT COAT WB TS5 can be done with a brush, roller or be sprayed or squeegee on horizontal surfaces. Thoroughly stir before application. As a priming coat TECHNOBIT COAT WB TS5 can be diluted with 15-20% in fresh clear water. Allow 2 to 4 hours for drying before applying the membrane. As a Protective Coating the first coat should be diluted with 20-30% in fresh clear water. Allow 2 to 4 hours for drying, then apply a second coat on the prepared surface diluted with 5-10% in fresh clear water. As a liquid system the first coat to be applied as a priming coat. Allow 2 to 4 hours for drying, then apply a second coat on the prepared surface. If the surface is to be topped with concrete, it is recommended that it should be lightly sprinkled with sand as soon as it is laid, which will act as a protective layer. Excess sand should be brushed off prior to laying the screed.