Method of Application
The treated surface must be free from dirt, debris and should be thoroughly saturated with water.
Application of FLINTKOTE be5 can be done with a brush, roller, sprayed or squeegee on horizontal surfaces. Thoroughly stir before application.
As a Priming Coat FLINTKOTE be5 can be diluted up to 1:1 in fresh clear water. Allow 2 to 4 hours for drying before applying the membrane.
As a Protective Coating the first coat should be diluted with 20-30% in fresh clear water. Allow 2 to 4 hours for drying, then apply a second coat on the prepared surface diluted with 5-10% in fresh clear water.
If the surface is to be topped with concrete, it is recommended that it should be lightly sprinkled with sand as soon as it is laid, which will act as a protective layer. Excess sand should be brushed off prior to laying the screed.
Close Every Gap. Restore Every Surface.
