Toucan

Method of Application

• To ensure against accumulation of solvent vapours, be sure to open all windows and doors. Use a nonsparking exhaust fan to provide air movement.

• Extinguish all flames and pilot lights at water heaters and heating systems. Turn off air/heating systems at thermostat. Walls can be damp, but must be free of active water leaks. Stir thoroughly before and during application.

• DO NOT THIN. Apply when air and surface temperatures are 10°C or higher. Do not apply if heavy rain is expected within 24 hours. Liberally apply the first coat using a thick polyester bristle brush, or by rolling a small section (1m x 1m), and then using abrush to work the coating into the pores of the masonry.

• Apply as much paint as necessary to produce a continuous, pinhole free film. Use a 20-25mm nap roller for unpainted, porous surfaces, and an 18mm nap roller for smooth or previously painted surfaces. The second coat can be brushed or rolled. Do not over spread. TOUCAN Acrylic is a two coat system. The first coat primes and seals the surface. The topcoat completes the sealing process to ensure protection against water intrusion.