Technobit Primer TS3 R

Method of Application

• The surface to be coated must be free from dirt, debris, oil and scale and saturated with water. Remove excess water.

• Stir TECHNOBIT PRIMER WB TS3 R thoroughly before use .

• Prime the surface with a 1:1 solution of TECHNOBIT PRIMER WB TS3 R in fresh clean water. Allow the primed surface to become touch dry. Then apply an undiluted coat of TECHNOBIT PRIMER WB TS3 R with the use of a brush, squeegee or roller.

• It is recommended to apply subsequent coats at an interval of 24 hours although this might be shortened depending on ambient temperatures.

• TECHNOBIT PRIMER WB TS3 R is designed as a primer+single coat application. However, 2 or more top coats can be applied if desired.