Technobit Primer D-41

Method of Application

• TECHNOBIT PRIMER D-41 should be thoroughly stirred before use and applied to the substrate by means of brush, roller or spray, at the rate of $300\text{ g/m}^2$ brush/roller application and $200\text{ g/m}^2$ spray application.

• The area to be treated should be free from grease, oil, dust etc. Concrete should be cured and at least eight days old. After drying any localized discolouration of the surface should be re-treated and allowed to cure. Only prime areas that are to be covered in one day.

• Do not leave the Primer exposed for more than 24h. If this should be the case, apply a further coat and allow to cure as above. Tools must be cleaned with White Spirit or Paraffin.