Lastick Alushield

Method of Application

1. Peel off the release film from the self adhesive side.
2. Start unrolling the membrane and press it to the surface.
3. Smoothen the membrane from the center to the edges with a wooden press in order to remove any entrapped air.
4. Use iron roller to ensure a proper and strong adhesion of the bitumen compound with the base surface.
5. Side overlaps shall be a minimum of 50mm on the selvedge and end overlaps 100mm.
6. When used as a flashing membrane on up-stands and parapets, Lastick Alushield membrane will be lapped with the base membrane and taken up on the up-stand and tucked inside the groove cut along the parapet wall. The tucked membrane will be sealed with a bitumen mastic sealant.