Method of Application
1- Surface preparation
The surface shall be cleaned thoroughly of all contaminants like dust, traces of curing compound, oil and grease.
All surface imperfections, protrusions, structurally unsound and friable concrete must be removed and repaired with a suitable concrete repair mortar.
2 – Priming
Apply (solvent based primer) @ 4- 6 m²/L to a clean smooth and dry surface by brush, roller or spray.
Allow the primer to dry prior to the application of the membrane. As the viscosity of the primer is low, it easily penetrates into the concrete pores which promotes the adhesion between the membrane and the concrete surface. In addition to that the primer also acts as a binder for the dust which gets accumulated on the concrete surface even after cleaning.
Close Every Gap. Restore Every Surface.
