Description :

Lastick Band is carrierless self adhesive waterproofing Band made of elastomeric bitumen compound and Aluminium foil surface. The underface is composed of a silicone split-back release paper , it is highly recommended for metal sheets waterproofing and repair works of diffrent substrates.

Major Features : 

• Excellent solar reflectance ( Aluminum surfacing )
• Safe Application ( Flameless )
• Easy to use ( Self Adhesive )
• Environmentally Friendly ( No Waste )
• Fast Application
• Good tear and puncture resistance
• Excellent tensile strength in both longitudinal and transverse direction
• Good resistance to water & vapor
• Excellent adhesion to vertical and horizontal surfaces

Uses :

• Multi purpose waterproofing membrane
• It can also be used as a flashing on up-stands

Method of Application :

1- Peel off the release film from the self adhesive side.
2 – Start unrolling the membrane and press it to the surface.
3 – Smoothen the membrane from the center to the edges with a wooden press in order to remove any entrapped air.
4 – Use iron roller to ensure a proper and strong adhesion of the bitumen compound with the base surface.
5 – Side overlaps shall be a minimum of 50mm on the selvedge and end overlaps 100mm.
6 – When used as a flashing membrane on up-stands and parapets, Lastick Band Alushield membrane will be lapped with the base membrane and taken up on the up-stand and tucked inside the groove cut along the parapet wall. The tucked membrane will be sealed with a bitumen mastic sealant

Storage & Handling :

Lastick Band Alushield rolls should be kept in an upright position in a flat, properly ventilated and sheltered storage area away from sunrays.